Shruti All you need for this project is:
First, take your wire cutters and cut off the hooks from the dangly earrings. Next, string the beads onto the wire. Make sure to alternate between small and large beads. Once all the beads are on, twist the wire to secure them in place. Finally, use the needle nose pliers to open up the hoop earrings and hook them onto the wire. That’s it! You now have a new pair of beautiful, dangly earrings!
All you need is a few materials
If you're looking for a quick and easy DIY earring project, then this is the tutorial for you! With just a few materials, you can create beautiful dangly earrings that will add a touch of glamour to any outfit. So gather up your supplies and let's get started!
You'll need:
-Wire cutters
-Pair of pliers
-2 eye pins
-2 beads
-Jump ring
-Earring hooks
First, take your wire cutters and cut one of the eye pins in half. Next, use your pliers to bend the two halves of the eye pin into slightly curved shapes. These will be the tops of your earrings.
Now take your two beads and thread them onto the other eye pin. Attach the end of the eye pin to one of the curved wire pieces using a jump ring. Repeat this step for the other earring.
Finally, add your earring hooks to the jump rings and you're all done! These earrings are so simple to make and they look great too!
Get started by cutting the top of your tshirt off
You can make beautiful, dangly earrings in just a minute with this easy DIY trick! All you need is an old t-shirt and a pair of scissors. Start by cutting the top off of your t-shirt, then cut a strip of fabric about 1-2 inches wide. The wider the strip, the bigger your earrings will be. Next, tie a knot in the center of the strip to create a loop. Cut the strip into equal halves, then take one half and thread it through the loop. Pull tight to create a knot, then trim any excess fabric. Repeat with the other half of the strip to create a second earring. That's it! You now have a pair of unique, one-of-a-kind earrings that are sure to turn heads.
Fold the fabric in half
Assuming you have a piece of fabric cut to size, fold it in half horizontally. This will be the top part of the dangly earring. Next, take your scissors and make a small slit in the center of the fold. This will be where you thread your earring wire through.
Now take your earring wire and thread it through the slit you just made. Once you have both ends of the wire through the slit, twist the wire around itself a few times to secure it in place. Finally, cut off any excess wire that is sticking out.
Place your earring box on one side of the fold and make a straight line where you will cut
If you want to make beautiful dangly earrings, then this one-minute DIY trick is for you! All you need is a pair of scissors and an earring box. First, place your earring box on one side of the fold and make a straight line where you will cut. Next, cut along the line and open up the box. Now, take one earring and thread it through the hole in the bottom of the box. Finally, close the box and repeat with the other earring. Voila! You've now made a pair of beautiful dangly earrings in just one minute!
Cut up to but not through your line and repeat with the other side
If you're looking for a quick and easy way to make beautiful dangly earrings, look no further than this one-minute DIY trick! All you need is a pair of scissors and some string or wire. Simply cut up to but not through your line on one side of the string, then repeat with the other side. Voila - you've just created a lovely set of earrings that are perfect for any occasion!
